CLEAR INJECTION MOLDING
Clear
non-toxic vinyl compounds are utilized by the health and medical industries
for injection molding of various components such as drip chambers, connectors,
valves, etc.
The vinyl components used in preparation of such medical products must be manufactured to the highest standards of quality and purity. For injection molding, such compounds must also be formulated to provide excellent heat stability, high flow characteristics, and good mold release.
Colorite specializes in the manufacture of such compounds. The plant has been so designed as to avoid contamination of materials produced. Quality control procedures have been instituted to assure the processor of complete traceability as well as consistent and reproducible quality.
"12" SERIES COMPOUNDS
| Typical Physical Properties | ||||||
| Compound | Shore Hardness |
Tensile Strength (psi) |
Elongation (%) |
100% Modulus (psi) |
Brittle Temperature (°C) |
Specific Gravity |
| 4012 | 40(A) | 980 | 490 | 260 | --- | 1.16 |
| 5012 | 50(A) | 1300 | 475 | 365 | --- | 1.15 |
| 5512 | 55(A) | 1500 | 450 | 500 | --- | 1.17 |
| 6012 | 60(A) | 1600 | 450 | 550 | -48 | 1.18 |
| 6512 | 64(A) | 1700 | 450 | 620 | -44 | 1.19 |
| 6812 | 68(A) | 1900 | 400 | 800 | -40 | 1.20 |
| 7012 | 70(A) | 2000 | 400 | 950 | -38 | 1.21 |
| 7512 | 75(A) | 2200 | 375 | 1030 | -35 | 1.225 |
| 7812 | 78(A) | 2300 | 350 | 1200 | -31 | 1.23 |
| 8012 | 80(A) | 2550 | 350 | 1270 | -29 | 1.235 |
| 8312 | 83(A) | 2700 | 330 | 1500 | -27 | 1.24 |
| 8512 | 85(A) | 2800 | 325 | 1770 | -25 | 1.25 |
| 9012 | 90(A) | 3000 | 300 | 2200 | -20 | 1.27 |
| 9512 | 95(A) | 3150 | 275 | 2350 | -15 | 1.28 |
| 9612 | 96(A) | 3300 | 250 | 2500 | -11 | 1.29 |
| 9812 | 66(D) | 3300 | 330 | --- | 8 | 1.31 |
| 1124 | 75(D) | 5800 | 50 | --- | --- | 1.34 |
| 1114 | 74(D) | 5800 | 50 | --- | --- | 1.33 |
| 10013G-015 | 75(D) | 6200 | 150 | --- | --- | 1.36 |
| 10014G-015 | 76(D) | 5700 | 200 | --- | --- | 1.33 |
